Crossover Cable Network

Part:   1  2  3  4 

(Continued from previous part...)

Configuring Crossover Cable Network

Assuming that I have two computers: a desktop and a laptop, here are the steps to connect them and configure them into a network:

1. Connect the crossover cable to the network connectors of both computers. You should see a tiny light coming up on the connector when the cable is well connected.

2. On the laptop, go to Start > Control Panel > Network Connections > Local Area Connection.

3. Right mouse click on "Local Area Connection", and select "Properties". The "Local Area Connection Properties" dialog box shows up.

4. Select "Internet Protocol(TCP/IP)" and make it checked.

5. Select "Internet Protocol(TCP/IP)" and click the Properties button. The "Internet Protocol(TCP/IP) Properties" dialog box shows up.

6. Select "Use the following IP address" and make it checked. Enter "192.168.0.1" in the IP address field. Enter "255.255.255.0" in the subnet mask field.

7. Click the OK button to close the "Local Area Connection Properties" dialog box.

8. Click the Close button to close the "Local Area Connection Properties" dialog box.

9. On the desktop, repeat step 2 to step 8 the same way as on the laptop except that entering "192.168.0.2" in the IP address field and entering "255.255.255.0" in the subnet mask field.

10. Open a command window and run the ipconfig and ping commands:

>ipconfig
Windows IP Configuration

Ethernet adapter Local Area Connection:

        Connection-specific DNS Suffix  . :
        IP Address. . . . . . . . . . . . : 192.168.0.2
        Subnet Mask . . . . . . . . . . . : 255.255.255.0
        Default Gateway . . . . . . . . . :

>ping 192.168.0.1

Pinging 192.168.0.1 with 32 bytes of data:

Reply from 192.168.0.1: bytes=32 time<1ms TTL=128
Reply from 192.168.0.1: bytes=32 time<1ms TTL=128
Reply from 192.168.0.1: bytes=32 time<1ms TTL=128
Reply from 192.168.0.1: bytes=32 time<1ms TTL=128

Ping statistics for 192.168.0.1:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms

11. On my laptop, open a command window and run the ping command:

>ipconfig
Windows IP Configuration

Ethernet adapter Local Area Connection:

        Connection-specific DNS Suffix  . :
        IP Address. . . . . . . . . . . . : 192.168.0.1
        Subnet Mask . . . . . . . . . . . : 255.255.255.0
        Default Gateway . . . . . . . . . :

(Continued on next part...)

Part:   1  2  3  4 

This site Web